Sewing a straight seam is easier when you learn to guide the fabric without pulling it. This exercise uses scrap woven fabric to practice starting, stopping, maintaining a seam allowance and pressing.

Gather your materials

Cut two rectangles of stable woven fabric, approximately 15 × 25 cm each. Have matching thread, a suitable sewing-machine needle, scissors, pins or clips and an iron. Consult your machine’s manual for safe threading and operation.

Prepare the machine

Thread the machine and bobbin according to its manual. Select a basic straight stitch and an ordinary stitch length suitable for the test fabric. Put two fabric pieces right sides together and align their long edges.

Choose a seam allowance

For this practice, use 1.5 cm from the long edge. Locate the matching measurement on your machine or mark a guide. Lower the presser foot before stitching and keep fingers away from the moving needle.

Sew at a comfortable pace

Start with a short securing stitch if appropriate, then sew slowly along the edge. Allow the machine to feed the fabric; your hands guide rather than pull. Watch the edge against the guide instead of staring at the needle. Stop before the end, secure the stitches and cut the thread.

Measure and press

Open the fabric and inspect the seam. Is it mostly straight? Does the stitch look balanced? Measure the allowance at several points. Press the seam flat, then press the allowance open or to one side. Notice how much neater the sample becomes after pressing.

If it doesn’t look right

Skipped stitches may suggest an unsuitable or damaged needle. Puckering may come from mismatched thread, needle, tension or fabric handling. Review your machine instructions and test one variable at a time on scraps rather than changing several settings at once.

Repeat the exercise once or twice. Neat, consistent basics make later projects easier and more enjoyable.


Ready for another project?

Explore our project finder to match sewing ideas with your experience.

Browse project guides