Seam allowance is the space between the cut fabric edge and the stitching line. It gives you material to join pieces together and finish raw edges. Using the wrong allowance changes the finished garment dimensions, sometimes enough to affect fit significantly.
Do not assume a universal number
Common seam allowances include 1 cm, 1.5 cm and 5/8 inch, but the amount is determined by the pattern designer. Some independent patterns use different allowances for hems, necklines, cuffs or specialty seams. Read each seam instruction rather than applying one number everywhere.
Find the stitching line
Some patterns print both cutting and seam lines; others show only the cutting line and state that seam allowance is already included. If a pattern excludes seam allowances, add the exact amount before cutting, following the designer’s directions. Cutting first and adding later may leave the pieces too small.
Use a consistent machine guide
Many sewing machines have measurement marks on the needle plate. Check whether these marks correspond to the active needle position. Practice on scrap fabric and measure from the line of stitching to the fabric edge with a ruler. For a long straight seam, a removable seam guide may help if it is safely placed.
Press correctly
Patterns may instruct you to press the allowance open, toward one side or toward a particular facing. Pressing helps the fabric lie neatly and makes later steps more accurate. Some seams are trimmed, graded or clipped after sewing, but do not remove material until you understand why the instruction calls for it.
Finish raw edges appropriately
Woven fabrics often fray, so you may need a zigzag, overlock, French seam or another finish. The best option depends on fabric, seam position and equipment. Test a sample to check that the edge finish does not create excess bulk or distort the seam.
Consistent seam allowances are one of the simplest ways to make handmade clothing fit more predictably.
Ready for another project?
Explore our project finder to match sewing ideas with your experience.
Browse project guides