Warm sewing studio worktable with folded fabrics and dressmaking tools

A tote bag is an ideal first useful project because you can cut the pieces with a ruler instead of a commercial pattern. This version is an unlined, flat bag made from stable woven fabric. It is suitable for carrying a book, light groceries or a small sewing kit—not heavy loads unless you choose suitable fabric and reinforce the handles.

What you will make

The finished bag is approximately 40 cm wide by 40 cm tall when sewn with a 1 cm seam allowance and the top hem below. It has two fabric handles and no boxed corners. These are original measurement-based instructions, not a PDF pattern download.

Materials and cutting list

  • Medium-weight woven cotton or canvas; wash and press first if appropriate for the fabric.
  • Two bag rectangles, each 42 × 45 cm.
  • Two handle strips, each 10 × 60 cm.
  • Matching thread, scissors or rotary cutter, ruler, pins or clips, iron and sewing machine.

Cutting note: Measurements include the seam and hem allowances described here. For directional prints, place the top of both bag pieces in the same direction. If using thick canvas, make one sample handle before stitching all layers.

Sew the handles

  1. Fold each handle strip lengthwise with wrong sides together and press a center crease. Open it, fold both long raw edges to the center crease, then fold in half again. You now have a strip about 2.5 cm wide with enclosed edges.
  2. Press and topstitch along both long edges. Sew slowly so the folded layers remain aligned. If the fabric is bulky, a lighter handle fabric may be easier.
  3. Mark the handle positions on the right side of each bag rectangle. Place the ends approximately 9 cm in from the nearest side edge; check that the handles are not twisted.

Sew the bag body

  1. With right sides together, sew the two long sides and bottom edge using a 1 cm seam allowance. Backstitch at the start and end. Leave the top open.
  2. Finish those raw seams using zigzag stitches, pinking or another suitable method. Press the side seams carefully. Turn the bag right side out to inspect the corners, then turn it wrong side out again for hemming if that is easier.
  3. Turn the top raw edge toward the wrong side by 1 cm; press. Turn it down by a further 3 cm and press again.
  4. Slip the ends of each handle under this folded hem, matching the marked positions. Stitch all the way around the lower fold, catching each handle end. Fold each handle up and topstitch again near the top edge. Reinforce each attachment with a small rectangle of stitching; avoid sewing through extra layers that exceed your machine’s capacity.

Check the result

Tug each handle gently to test the attachments. Check for skipped stitches or loose thread at the corners. A bag that looks uneven often improves with pressing; avoid pulling the fabric as you sew. Consider a narrower bag, longer handles or a lining for your next version.

If you want a different bag shape

A boxed-bottom bag needs extra corner construction, so the cutting math will change. Use a tested pattern for a fitted zippered bag or heavy-duty tote. For more ideas, visit our project finder and the beginner sewing toolkit. You can also compare pattern formats in our free-versus-paid patterns guide.


Ready for another project?

Explore our project finder to match sewing ideas with your experience.

Browse project guides