
A basic gathered skirt can be sewn from rectangles rather than shaped garment pattern pieces. It is a useful first garment when the design has plenty of ease through the hips and a flexible elastic waistband. This method is for a simple straight skirt; it is not a substitute for fitted skirt drafting or for styles that require shaped waist and hip seams.
Decide the skirt length and fullness
Measure your full hip circumference and your desired skirt length from waist to hem. For a moderately gathered skirt, plan a total fabric width of approximately 1.4 times your full hip measurement before adding side seam allowances. That gives the skirt room to pass over the hips and gather when worn. If your fabric is very thick, you may prefer less fullness; lightweight fabric can take more.
Example: With a full hip of 100 cm, total skirt width before side allowances is about 140 cm. Cut two rectangles each 72 cm wide (70 cm plus 1 cm seam allowance at both sides). For a desired finished length of 60 cm, cut the rectangles approximately 68 cm tall to allow for a 1 cm plus 3.5 cm waistband casing, a 1 cm plus 2 cm hem and a little adjustment. Confirm the dimensions with a paper sketch before cutting.
Materials and preparation
Choose a stable woven fabric with enough width for the panels, matching thread and 2.5 cm wide non-roll waistband elastic. Wash and press the fabric if recommended. Measure the actual elastic thickness and plan a casing slightly wider than the elastic, so it can move without twisting.
Sew the skirt panels
- Place the two fabric panels right sides together. Sew the side seams using a 1 cm seam allowance and finish the raw edges. Press seams open or to one side.
- At the top, press 1 cm to the wrong side and then another 3.5 cm. Stitch close to the lower folded edge, leaving a 5 cm gap to thread the elastic.
- Cut the elastic using your waist measurement as a starting point, then test its comfortable stretch around your actual waist. Elastic recovery varies by brand; do not blindly subtract a fixed amount.
- Thread the elastic through the casing with a safety pin. Keep it flat, overlap the two ends securely and sew a reinforced join. Distribute the gathers, then close the gap. A few small vertical stitches at the side seams can help prevent twisting.
- Try on the skirt and confirm the length. Press a 1 cm first fold and a 2 cm second fold at the hem, then stitch around. On strongly curved or uneven edges, leveling may be necessary before hemming.
Improve the result
If the skirt feels too bulky at the waist, reduce fullness next time rather than tightening the elastic. If it cannot pass over the hips, your total fabric width may be insufficient. If the waistband twists, check casing width and elastic compatibility. Keep a note of your successful measurements.
For a more fitted silhouette, pockets, a yoke or precise size grading, choose a tested commercial pattern. Our gathered-skirt pattern guide explains what to look for, while the body-measurement tutorial covers accurate measuring.
Ready for another project?
Explore our project finder to match sewing ideas with your experience.
Browse project guides