Project type: Original measurement-based tutorial. No proprietary pattern or PDF is required. Difficulty: Beginner. Fabric: Stable woven cotton or linen blend.

Why this is a good first project

A drawstring bag teaches four useful skills: measuring fabric, sewing straight seams, folding a neat casing and pressing. You can use the finished bag for small sewing tools, travel accessories or a gift. The dimensions below create a simple flat bag; fabric thickness and the cord you choose will affect the result.

Materials and dimensions

  • Two rectangles of fabric, each 30 cm wide × 36 cm tall (approximately 11⅞ × 14⅛ inches).
  • Two cords, each approximately 75 cm long; choose a cord that passes comfortably through the casing.
  • Thread, scissors, pins or clips, iron, tape measure and a safety pin.

These measurements include a 1 cm seam allowance on the sides and bottom. The finished flat bag will be approximately 28 cm wide and 31–32 cm tall, depending on the casing fold and stitch placement. It is not designed for carrying heavy objects.

Prepare the top openings

On each rectangle, finish the two side edges to prevent unraveling, using a zigzag stitch or another suitable method. With fabric wrong side facing you, fold the top edge down 1 cm and press. Fold it down another 3 cm and press again to form a smooth casing. Do not stitch the casing yet.

Join the bag

Unfold the top casings temporarily. Put the two pieces right sides together, aligned at the bottom and side edges. Sew both sides and the bottom with a 1 cm seam allowance, but stop the side seams 5 cm below the original top edge to leave openings for the cords. Backstitch carefully at the stopping points. Secure the seam allowances around the side openings so they lie flat and do not fray. Turn the bag right side out and check the upper corners.

Make the casings and thread the cords

Fold both top casings along the pressed creases. Stitch near each casing’s lower folded edge, keeping the front and back casings separate. You should have two channels open at both ends. Attach a safety pin to one cord and thread it through the front casing and back casing in a loop, returning to its starting side. Repeat with the second cord, starting from the opposite side. Knot each cord’s two ends together. Pull both cord loops to close the top.

Check your result

Test the bag with lightweight items. If the casing catches, check for accidental stitching through both layers or a cord too thick for the channel. Press gently to finish. Once you can make this bag neatly, try changing its dimensions or adding a small decorative patch before assembling the pieces.

Note: This is an original instructional project, not a tested commercial pattern. Make a small sample first if you plan to alter the dimensions or use a different material.


Ready for another project?

Explore our project finder to match sewing ideas with your experience.

Browse project guides