Fabric and fit belong together

A sewing pattern is the starting plan, but fabric and body measurements determine much of the finished result. The same pattern can look structured in crisp cotton, soft in linen, and completely different in a drapey rayon. Good selection begins by understanding what the designer intended.

Woven versus knit fabrics

Woven fabric is made from crossing lengthwise and crosswise yarns. Many stable wovens, such as quilting cotton or cotton poplin, are suitable for learning because they can be measured, pressed and cut predictably. Knit fabric is constructed from interlocking loops and often stretches. Knit patterns may be designed with less ease than woven patterns and require suitable needles, stitches and sometimes different finishing techniques.

Never substitute woven fabric for stretch knit without confirming the pattern is drafted for that choice. Even when both materials look similar in a photograph, their fit and recovery may be different.

Understand weight and drape

Lightweight fabric is not automatically easy to sew. A fine, slippery fabric may shift while cutting, while a medium-weight stable fabric can be more forgiving. Drape describes how fabric hangs and folds. A soft skirt usually needs a different fabric behavior from a sharply tailored apron or structured bag.

Before buying fabric, read the pattern’s recommended fiber, weight, stretch and width. A shop sample can help you understand the fabric’s hand, transparency and tendency to crease.

Take measurements accurately

Use a flexible tape measure on the body without pulling it tight. Depending on the garment, record full bust or chest, high bust, waist, hip, height and preferred garment length. Keep the tape level. Have someone help with measurements that are difficult to take yourself.

Pattern sizes are not consistent between brands, nor do they necessarily match ready-to-wear labels. Choose from the actual body measurement chart, then compare the finished garment measurements whenever they are supplied.

What is garment ease?

Ease is the difference between the body measurement and the finished garment measurement. Positive ease allows room for comfort, movement and the design silhouette. Some stretch garments use negative ease because the fabric is intended to stretch over the body. Different parts of one garment may use different amounts.

For a loose top, generous ease may make fitting easier, but too much can affect the look and the placement of seams. A test garment in inexpensive fabric can help before cutting into a treasured material.

Before cutting

  1. Read all instructions and the full cutting layout.
  2. Prewash and press fabric when the fiber and project require it.
  3. Check directional prints, nap and fabric grain.
  4. Verify how many pieces must be cut and whether any are cut on the fold.
  5. Mark notches, grainlines, darts and other critical symbols carefully.

For more detail, read our tutorials about fabric choice and body measurements. Good fit begins long before your first seam.